If you make skincare, essential oil blends or little gift sets, you'll know that the smallest containers are often the hardest to get right. When you label small bottles by hand, there's very little to hold on to and even less room to line things up.
Roller bottles, dropper bottles and mini jars all need the label in the same place every time, especially when they sit side by side in a gift box or on a market table.
We'd like to lend a hand. Below we look at why small containers are so fiddly, and how our Label Helper Junior keeps your labels where you want them.
Why it's fiddly to label small bottles by hand
None of this is about skill. Small containers simply leave less margin, and a few things make them awkward.
Not much to hold
A roller bottle or 30 ml dropper bottle is easy to roll or tip while you're also peeling and placing a label. One hand steadies, the other applies, and neither has much room.
Judging the height by eye
On a short container, a label that sits a touch higher on one bottle than the next is easy to spot in a row. Measuring every one takes time, and it's easy to lose your place in a batch.
Longer labels on a small curve
A longer label has further to travel around a narrow bottle. Without support, the tail end can be hard to keep in line as you smooth it on.
Some makers like a playful, angled label, and that's a style choice. When you want level, matching labels across a batch, a guide helps. Our post on applying labels neatly has more general tips.
Label Helper Junior
Made for small containers
The Label Helper Junior is the smaller version of our original Label Helper, designed for small round or cylindrical containers of roughly 25–50 mm in diameter.
The container rests in a compact cradle. An adjustable placement guide sets where the label sits, and an extendable Base Slider supports longer labels as you apply them. Keep the same guide setting and every matching container gets its label in the same place.
It comes in right-handed and left-handed versions.
See the Label Helper Junior in use
How to use the Label Helper Junior
-
Set the Base Slider
Extend the Base Slider as needed to support the length of your label, then lightly tighten the thumb screw.
-
Position the container
Rest the bottle, jar or container securely in the cradle.
-
Set the label placement
Adjust the guide to where you'd like the label to sit, then lightly tighten the guide thumb screw.
-
Apply and rotate
Line the label up against the guide, press the first edge onto the container, then gently rotate the container while smoothing the label into place.
-
Repeat for the batch
Keep the same guide setting across matching containers for consistent placement.
Label Helper Junior questions
Small round or cylindrical containers of approximately 25–50 mm diameter, measured across the widest part. We've tested it with roller bottles, essential oil bottles, 30 ml and 50 ml serum and dropper bottles, 60 ml amber jars, mini cosmetic jars and selected 100 ml cylindrical bottles. Sizes vary between suppliers, so please measure yours before ordering.
For larger round or cylindrical jars, bottles and tins of roughly 55–80 mm diameter, the original Label Helper is the better fit.
It wasn't specifically designed for full wraparound labels. The Base Slider can help support longer labels, but if you're unsure whether yours will work, send us your container diameter and label size before ordering and we'll check.
Choose the hand you use to press and smooth the label. On the right-handed version the guide sits on the left, so you steady the container with your left hand and apply with your right. The left-handed version is the mirror image.
For flat-sided, heavily tapered or unusually shaped containers, or anything outside the size range, please get in touch first. We may be able to adjust the tool, and we've designed bespoke labelling jigs for tapered bottles before.
Not sure your bottle will fit?
Send us your container diameter and label size and we'll be happy to check before you order.
Label tools for every container size